© 2024 Copyright Ferrofish Germany - All rights reserved.
Getting Started with Dante
Official Audinate Video Training Series
Part 1: Dante Overview of the Getting Started training series
- Moving from analog to digital networking
- Working with Dante products from multiple manufacturers
- Dante performance
- Basic network equipment requirements for Dante
- Basic networking knowledge and Dante
Part 2. A Simple Dante Network
- Creating a basic network with Dante devices and a network switch
- Discovery of Dante devices
- Routing signals with Dante Controller
- Auto-reconnect of subscriptions between power cycles
Part 3: Dante Controller
- Automatic discovery of connected Dante devices
- Navigating the Dante Controller interface
- Routing signals
- Split signals
- Naming devices and audio channels
- Clocking basics
Part 4. Dante Virtual Soundcard
- What is Dante Virtual Soundcard?
- Stopping and starting Dante Virtual Soundcard
- ASIO and WDM drivers for Windows
- Configuring Dante Virtual Soundcard
- Dante Virtual Soundcard demonstration: multitrack recording
Part 5: Networking Basics for Audio
- IP addresses
- DHCP
- Names vs. addresses
- Quality of Service (QoS) settings on switches
- Choosing a network switch
Part 6. Dante Clocking Basics
- How Dante clocking compares to legacy digital audio
- Dante clock roles and elections
- Clock failure modes
- Configuring Clock behaviors in Dante Controller
- Using external clocks
Part 7: Unicast and Multicast Transport
- Understanding Unicast and Multicast on IP networks
- Best practices for use of Multicast
- Configuring Multicast with Dante Controller
Part 8. Dante Redundancy
How Dante Redundancy works
Configuring a redundant network
Best practices for redundancy